Cleanium Thermoscan

The Cleanium Thermoscan is the sanitising unit with integrated thermoscanner for measuring body temperature.


Through the use of a state of the art CMOS camera it is able to detect the temperature in less than 0.2 seconds, with a measurement accuracy of +/- 0.3°C and up to a distance of 1.5m.

The sensor is not limited to temperature detection but is even capable of detecting whether the person is wearing a mask.

Immediately underneath the thermal imaging camera is the no-touch automatic sanitising dispenser, which ensures more than 7000 dispenses with a single 3.1 litre gel charge.


The inside of the Cleanium Thermoscanner is sealed by means of a glass capsule which, together with the simple refill procedures, keeps the devices sanitised for their entire life.

Dispensing is triggered by a sensor that releases the correct amount of sanitiser each time it is used and is followed by decompression, which sucks up excess liquid and avoids waste due to dripping.

An 8" OLED display is installed on the dispenser to monitor consumption in real time and intervene promptly for recharging.


Optionally, it is also possible to activate the Cleanium Cloud Connect application, which simplifies the management of multiple devices by connecting them through an IoT network.

This system allows constant control over the charge level of each hygiene column, as well as the flow of people and their temperatures.

The data will be verifiable on any device in real time.


The adoption of Cleanium Cloud Connect offers the additional possibility of configuring the device to open a turnstile only when the temperature is below a user selected value.


All Cleanium products benefit from a tax credit of 60% of the list price.

Starting from

3.780€ VAT excluded
Technical data arrow_drop_down
Access regulation and visualization through intuitive graphic of STOP/GO and acoustic signal according to the detected temperature
Thermal scanner for temperature control
The CMOS thermal imaging camera is capable of measuring body temperature in less than 0.2 seconds with a tolerance of +/- 0.3 °C at a distance of 0 to 1.5m
Mask detection
With voice guidance
8’’ Monitor
Automated and controlled dispensing (ToF)
Meter with OLED display
More than 7000 dispensing operations
5-year warranty on the components
Weight: 30 Kg
Dimensions: 170 x 45 x 45 cm
Voltage: 110V/220V
Tank capacity: 3.1L
Liquid calibration range: 0.1ml-5ml
8” IPS LCD Display with 1280x800px resolution
Vertical and horizontal viewing angle 170°
Number of colours 16.7M
2MP camera
Conical framing angle 32°
Thermal module 80x60 active pixels
Measurement accuracy +/- 0.3°C
Connect Mobile activatione
Cleanium Cloud Software
Cloud Connection
Access management
Dashboard for online monitoring
SMS/E-Mail Alert service
IOT Connectivity